Article Categories Home-Improvement Swimming-Pools-Spas

3 Simple Steps To Sanitize Your Pool Using Chlorine Tablets


By: Pramod Kr Chaudhary


When you surf the internet, you can find different types of chlorine products that have varied benefits to their credit. Chlorine tablets for swimming pools promise one the most cost-effective ways of sanitizing your pool. In fact, if you research a bit, you will discover these tablets have been the most preferred product for pool cleansing for more than a century. These tablets offer the simplest way of sanitizing pool water and kill viruses, germs and deadly bacteria. Unlike the substitutes, chlorine tablets oxidize the water in the process of pool sanitization, thereby keeping your pool glistening and crystal clear.

Though it is undeniable that chlorine tablets promise the simplest way to keep your pool clean, following are the steps you need to follow to get the best results:

Step 1: Test chlorine residual

You can check the chlorine residual level in the same way that you test other vital pool components; i.e. with the help of a test kit. An ideal test kit will give you the readings for both free chlorine as well as total chlorine available in the pool water. Free chlorine refers to the chlorine that still has the ability to sanitize the water while the total available chlorine is the sum of chloramines and free available chlorine. Chloramine is the resultant of chlorine and water wastes; this substance prevents free available chlorine from sanitizing your pool and may even cause burning sensations in the eyes, and releases strong chlorine odor.

Step 2: Add chlorine tablets

To eliminate chloramines, you can use chlorine tablets for swimming pools, ideally once every week. Here, it is worth mentioning that you need to add the chlorine tablets as per the size and depth of your pool. To know more about the ideal way of cleansing the pool water using these tablets, you can read the maintenance information available on the leading websites dedicated to pool gear. However, if you are still uncertain about the procedure, you may call a pool expert and get more information on the most efficient ways to sanitize your water and the products to use.

Step 3: Maintain apt chlorine level

In addition to killing existing bacteria and algae, pool chlorine tablets prevent the growth of harmful germs and algae. However, as a pool owner, you must keep in mind that for ideal pool sanitization, you need to maintain the reading of free available chlorine at 2 to 4 ppm. If the reading goes below the 2.0 mark, then you may discover growth of bacteria and algae. In contrast, you should not use the pool if chlorine levels are over the 4 ppm mark. Thus, if you wish to enjoy the benefits of your pool, you must ensure that the chlorine level of the pool water is always between 2 and 4 ppm by adding apt quantity of chlorine tablets for swimming pools.

Similar Articles